Surface Treatment Finishing - Plating, Powder Coating and Hardening
Plating, Powder coating and hardening process is used for a variety of reasons including corrosion resistance, solderability and wearability.

Strips of metal can be preplated to avoid a secondary process. Gold and other precious metals can be selectively plated onto a strip and reels of finished parts can be control-depth dipped to substantially reduce the plating costs. Strips of gold and other precious metals can be bonded onto a strip as an inlay or cladding.

Powder coating process also can be use to make the final product more attractive. It can protect the part surface from the  corrosion and increase the reliability of the product. It has many color of powder coating finishing such as grey, cream and greenish.

A heat treat process is used on products that require additional strength after metal stamping. This process is used only when the formability of the final product does not allow it to be formed or coined without cracking. Therefore, the part is stamped in the soft state and then hardened

Cleaning and Decreasing
A variety of cleaning options exist for preparing parts for heat treat, plating or assembly. Individual parts and reels of parts are cleaned to remove metal stamping oils.

Deburring
Although we can meet most minimal burr requirements directly out of the metal stamping die, deburring is available for parts that must be free of sharp corners. Abrasive and chemical deburring options exist for all types of products.

Tapping and Drilling
Some of the part may need to make certain diameter hole and required tread to assemble screw. We have the capability to complete your mission.

We have many other secondary process may you required. Please feel free to contact us either by phone, email, or fax.